Design of Chain-Plate Separation and Feeding Device of Fully Automatic Mechanical Press
Download as PDF
DOI: 10.25236/iccem.2021.047
Author(s)
Jinxiang Yang, Hai Zhang, Sheng Chen, Dazhao Dong
Corresponding Author
Hai Zhang
Abstract
When processing automobile wheel nuts on a fully automatic mechanical press, in order to solve the problem that the chaotically placed rough workpieces are difficult to be efficiently fed into the fixture in a certain direction and speed, a fully automatic mechanical press chain plate type separating and feeding device is designed. Based on the mechanical principle and design requirements of the device, the chain plate type separating and feeding device is designed with a large chain plate mechanism, a small chain plate mechanism, a feeding mechanism, and a fixed plate mechanism, and can realize automatic separation and feeding of blank workpieces. The three-dimensional design software SolidWorks was used to model the parts and the overall assembly, and the finite element analysis of the load and deformation of the fixed plate mechanism, and then the ordinary carbon steel-4mm was selected as the raw material. Compared with the commonly used vibration feeding device and multi-chain plate single-side feeding device, this device has high efficiency, low noise, strong anti-interference, high practical value, and can stably and reliably convey the blank workpiece in a fixed direction and speed. To the processing station.
Keywords
Mechanical pressure, Wheel, Fully automatic